MITSUBISHI MMT TAPER IRON SHAFT (0.355)
Couldn't load pickup availability
The relative of the matte-finished MMT Parallel Irons, MMT Taper Iron shafts use a 355 tip and a gloss cosmetic finish. They use the same construction and materials as MMT Parallel and are available in a massive SKU range from 55 A to 125 TX. Using Metal Mesh in the tip section to inccrease stability, MMT Taper Iron shafts consistently produce the center face strikes needed for effective iron play. MMT Taper Iron shafts have won multiple times on global tours and can be found in the bags of some of the best players in the world.
Who should play it? Golfers looking for straighter flight and more consistent strike patterns with their irons should try MMT Taper Iron shafts.
DISCLAIMER: CANNOT SHIP TO THE FOLLOWING COUNTRIES
- SOUTHEAST ASIA
- JAPAN
- TAIWAN
- HONG KONG
- MACAU
- CHINA
- KOREA
- AUSTRALIA
- NEW ZEALAND
- INDIA
SPECIFICATIONS
| Shaft | Flex | Length | Weight/GMS | Tip OD | Tip Length | Butt OD | Torque | Kick Point |
|---|---|---|---|---|---|---|---|---|
| 55 | A | 39.5" | 59 | 0.355 | TAPER | 0.596 | 3.5 | MID |
| 55 | A | 39" | 59 | 0.355 | TAPER | 0.596 | 3.5 | MID |
| 55 | A | 38.5" | 59 | 0.355 | TAPER | 0.596 | 3.5 | MID |
| 55 | A | 38" | 59 | 0.355 | TAPER | 0.596 | 3.5 | MID |
| 55 | A | 37.5" | 59 | 0.355 | TAPER | 0.596 | 3.5 | MID |
| 55 | A | 37" | 59 | 0.355 | TAPER | 0.596 | 3.5 | MID |
| 55 | A | 36.5" | 59 | 0.355 | TAPER | 0.596 | 3.5 | MID |
| 65 | R | 39.5" | 63 | 0.355 | TAPER | 0.593 | 3.5 | MID |
| 65 | R | 39" | 63 | 0.355 | TAPER | 0.593 | 3.5 | MID |
| 65 | R | 38.5" | 63 | 0.355 | TAPER | 0.593 | 3.5 | MID |
| 65 | R | 38" | 63 | 0.355 | TAPER | 0.593 | 3.5 | MID |
| 65 | R | 37.5" | 63 | 0.355 | TAPER | 0.593 | 3.5 | MID |
| 65 | R | 37" | 63 | 0.355 | TAPER | 0.593 | 3.5 | MID |
| 65 | R | 36.5" | 63 | 0.355 | TAPER | 0.593 | 3.5 | MID |
| 75 | S | 39.5" | 74 | 0.355 | TAPER | 0.606 | 3.7 | MID |
| 75 | S | 39" | 74 | 0.355 | TAPER | 0.606 | 3.7 | MID |
| 75 | S | 38.5" | 74 | 0.355 | TAPER | 0.606 | 3.7 | MID |
| 75 | S | 38" | 74 | 0.355 | TAPER | 0.606 | 3.7 | MID |
| 75 | S | 37.5" | 74 | 0.355 | TAPER | 0.606 | 3.7 | MID |
| 75 | S | 37" | 74 | 0.355 | TAPER | 0.606 | 3.7 | MID |
| 75 | S | 36.5" | 74 | 0.355 | TAPER | 0.606 | 3.7 | MID |
| 85 | R | 39" | 84 | 0.355 | TAPER | 0.596 | 3.3 | MID |
| 85 | R | 38.5" | 84 | 0.355 | TAPER | 0.596 | 3.3 | MID |
| 85 | R | 38" | 84 | 0.355 | TAPER | 0.596 | 3.3 | MID |
| 85 | R | 37.5" | 84 | 0.355 | TAPER | 0.596 | 3.3 | MID |
| 85 | R | 37" | 84 | 0.355 | TAPER | 0.596 | 3.3 | MID |
| 85 | R | 36.5" | 84 | 0.355 | TAPER | 0.596 | 3.3 | MID |
| 85 | R | 36" | 84 | 0.355 | TAPER | 0.596 | 3.3 | MID |
| 85 | S | 39" | 88 | 0.355 | TAPER | 0.602 | 3.2 | MID |
| 85 | S | 38.5" | 88 | 0.355 | TAPER | 0.602 | 3.2 | MID |
| 85 | S | 38" | 88 | 0.355 | TAPER | 0.602 | 3.2 | MID |
| 85 | S | 37.5" | 88 | 0.355 | TAPER | 0.602 | 3.2 | MID |
| 85 | S | 37" | 88 | 0.355 | TAPER | 0.602 | 3.2 | MID |
| 85 | S | 36.5" | 88 | 0.355 | TAPER | 0.602 | 3.2 | MID |
| 85 | S | 36" | 88 | 0.355 | TAPER | 0.602 | 3.2 | MID |
| 85 | S | 35.5" | 88 | 0.355 | TAPER | 0.602 | 3.2 | MID |
| 95 | S | 39" | 95 | 0.355 | TAPER | 0.610 | 2.9 | MID |
| 95 | S | 38.5" | 95 | 0.355 | TAPER | 0.610 | 2.9 | MID |
| 95 | S | 38" | 95 | 0.355 | TAPER | 0.610 | 2.9 | MID |
| 95 | S | 37.5" | 95 | 0.355 | TAPER | 0.610 | 2.9 | MID |
| 95 | S | 37" | 95 | 0.355 | TAPER | 0.610 | 2.9 | MID |
| 95 | S | 36.5" | 95 | 0.355 | TAPER | 0.610 | 2.9 | MID |
| 95 | S | 36" | 95 | 0.355 | TAPER | 0.610 | 2.9 | MID |
| 95 | S | 35.5" | 95 | 0.355 | TAPER | 0.610 | 2.9 | MID |
| 105 | S | 39" | 105 | 0.355 | TAPER | 0.598 | 2.8 | MID |
| 105 | S | 38.5" | 105 | 0.355 | TAPER | 0.598 | 2.8 | MID |
| 105 | S | 38" | 105 | 0.355 | TAPER | 0.598 | 2.8 | MID |
| 105 | S | 37.5" | 105 | 0.355 | TAPER | 0.598 | 2.8 | MID |
| 105 | S | 37" | 105 | 0.355 | TAPER | 0.598 | 2.8 | MID |
| 105 | S | 36.5" | 105 | 0.355 | TAPER | 0.598 | 2.8 | MID |
| 105 | S | 36" | 105 | 0.355 | TAPER | 0.598 | 2.8 | MID |
| 105 | S | 35.5" | 105 | 0.355 | TAPER | 0.598 | 2.8 | MID |
| 105 | TX | 39" | 113 | 0.355 | TAPER | 0.606 | 2.8 | MID/HIGH |
| 105 | TX | 38.5" | 113 | 0.355 | TAPER | 0.606 | 2.8 | MID/HIGH |
| 105 | TX | 38" | 113 | 0.355 | TAPER | 0.606 | 2.8 | MID/HIGH |
| 105 | TX | 37.5" | 113 | 0.355 | TAPER | 0.606 | 2.8 | MID/HIGH |
| 105 | TX | 37" | 113 | 0.355 | TAPER | 0.606 | 2.8 | MID/HIGH |
| 105 | TX | 36.5" | 113 | 0.355 | TAPER | 0.606 | 2.8 | MID/HIGH |
| 105 | TX | 36" | 113 | 0.355 | TAPER | 0.606 | 2.8 | MID/HIGH |
| 105 | TX | 35.5" | 113 | 0.355 | TAPER | 0.606 | 2.8 | MID/HIGH |
| 125 | S | 39" | 124 | 0.355 | TAPER | 0.606 | 2.8 | MID/HIGH |
| 125 | S | 38.5" | 124 | 0.355 | TAPER | 0.606 | 2.8 | MID/HIGH |
| 125 | S | 38" | 124 | 0.355 | TAPER | 0.606 | 2.8 | MID/HIGH |
| 125 | S | 37.5" | 124 | 0.355 | TAPER | 0.606 | 2.8 | MID/HIGH |
| 125 | S | 37" | 124 | 0.355 | TAPER | 0.606 | 2.8 | MID/HIGH |
| 125 | S | 36.5" | 124 | 0.355 | TAPER | 0.606 | 2.8 | MID/HIGH |
| 125 | S | 36" | 124 | 0.355 | TAPER | 0.606 | 2.8 | MID/HIGH |
| 125 | S | 35.5" | 124 | 0.355 | TAPER | 0.606 | 2.8 | MID/HIGH |
| 125 | TX | 39" | 125 | 0.355 | TAPER | 0.608 | 2.7 | MID/HIGH |
| 125 | TX | 38.5" | 125 | 0.355 | TAPER | 0.608 | 2.7 | MID/HIGH |
| 125 | TX | 38" | 125 | 0.355 | TAPER | 0.608 | 2.7 | MID/HIGH |
| 125 | TX | 37.5" | 125 | 0.355 | TAPER | 0.608 | 2.7 | MID/HIGH |
| 125 | TX | 37" | 125 | 0.355 | TAPER | 0.608 | 2.7 | MID/HIGH |
| 125 | TX | 36.5" | 125 | 0.355 | TAPER | 0.608 | 2.7 | MID/HIGH |
| 125 | TX | 36" | 125 | 0.355 | TAPER | 0.608 | 2.7 | MID/HIGH |
| 125 | TX | 35.5" | 125 | 0.355 | TAPER | 0.608 | 2.7 | MID/HIGH |
TRIP TRIMMING GUIDE
Taper tip shafts should never be tip trimmed because they are designed to discrete lengths. Butt trim taper tip shafts to finished length.